Hebei Kaixiang Electrical Technology Co., Ltd
Add to Cart
AC425-2000kW 3 Phase Load Bank With Grey Colour And Good Performance
Product description
AC425-2000kW 3 Phase Load Bank is of independent research and development of electricity load test equipment by our technology, combining dry load module with the automatic measurement and control module, can accurately detect all kinds of generator output power and load capacity, full load and overload test.The system can be used with a computer to realize the intelligent control, automatically completing the special test to all electrical parameters of generating set and generating tables, graphs, and supporting the print, comprehensively from the cumbersome manual operation to provide scientific and efficient detection means for the power generating sets.
Technical Parameter
| System Parameter | |
| Rating voltage/frequency | AC 3 phase 4 line, 425V/50Hz |
| Max Load Power | Resistive Load: 2000kW |
| Load Resolution |
Resistive Load: 18 steps, 1kW,2kW,2kW,5kW,10kW,10kW,20kW,50kW,100kW,200kW,200kW, 200kW,200kW,200kW,200kW,200kW,200kW,200kW |
| Power Factor | 1 |
| Load Tolerance (each step) | ±5% |
| Load Tolerance (overall) | ±3% |
| Fan &Control Voltage | External AC 3 phase 4 line,415V/50Hz |
| Wire Connection |
Load bank input——Copper bar (star coupling ”Y”) Control power input——Connector-bar |
| Communication Interface | RS485,RS232 |
| Insulation | F |
| Max Protection Grade | IP54 |
| Duty Cycle | Continuous |
| Cooling | Forced air cooling, by Axial Fan; horizontal inlet air, vertical exhaust cooling |
| Enclosure | Container type,with a ladder, air inlet and outlet with mesh enclosure and protection door |
| Internal Lighting | Adequate internal lighting will be provided |
| Transportation | Hoisting, there are lifting lug in top of casing |
| Color | Grey RAL7035 or as required |
| Dimensions | About 4000mm×2350mm×2591mm(L×W×H) |
| Operating Environment Parameter | |
| Ambient Temperature | -10℃～+50℃ |
| Relative Humidity | ≤95% |
| Atmospheric Pressure | 86～106kPa |
| Brands of Main Components | |
| Contactor | Schneider |
| Fuse | Miro |
| PLC | Siemens |
| Alloy Resistor | (self-developing) |
| Data Processing Software | (self-developing) |
Overload protection with fan: when any fan cannot normally work, the load bank can unload automatically and give an alarm.
Emergency Stop: manually press the Emergency Stop switch on the panel, then load bank is in locked state, and cannot do any operation.
Protection Switch: some protection with switch, when misinformation or in special need, user can close the corresponding protection function temporarily.
Safety Monitor: through indicator lights on main interface, user can monitor system state. When system abnormally stop and protect, software interface prompt the cause immediately.
Short Circuit Protection and Over Current Protection: when short circuit, fuses in the load bank can insure to unload automatically.
Overheating Protection: temperature is over the safe threshold value, system unload automatically and give an alarm.
Smoke Fog Protection: If there is smoke fog in the container, system cut off load automatically and give an alarm.
Application
Large generator system testing in ocean engineering, drilling facilities,ship construction etc field
Factory testing for generator, static voltage characteristic test, speed characteristic test;
Marine generator overload protection test,parallel operation test,reverse power and reverse current protection test
